2020 Jacobsen® HF600 Base
- Year 2020
- Make Jacobsen®
- Model HF600
2020 Jacobsen® HF600 Base
2020 Jacobsen® HF600
- With the unique ability to mow with three, four or five reels, and the durability to master the rigors of the deepest rough, the new HF600 provides a legendary quality of cut. The exclusive combination of the industry's widest cut and narrowest transport width gives you the ability to mow between bunkers, around trees or down fairways with ease. A comfortable seat and controls mounted on an adjustable armrest make operation easy and efficient. The pairing of unsurpassed quality of cut and the performance to execute a multitude of applications, including scalping, gives the HF600 unrivaled flexibility.
- The highest HP and best power to weight ratio in the industry for more productivity during scalping and verticutting.
- The capacity to mow with three, four or five reels allows for maximum flexibility on the course. The widest cut of 138-inches and narrowest transport width in the industry, the HF600 increases productivity and efficiency.
- Heavy duty components of reels and lift arms are built to stand up to the harshest tasks and terrain.
Engine
Cooling System
Liquid cooled | Side-by-side radiator/hydraulic oil cooler; pressurized; 8 qt (7.6 L) capacity, 8.5 fins per inch
Cylinder Liners
4-cyl
Engine Power
Rated (gross): 48.6 kW (65.2HP) @ 2700 rpm
Engine Type
Kubota® V2403-CR-T-E5
Emissions
Level: EU Stage IIIB - (EPA Tier 4 Final)
Fuel System
Fuel Type
Turbo diesel
Brakes
Brake System Type
Service: Dynamic through traction system
Parking Brake
Wet parking brakes integrated into wheel motors
Wheels & Tires
Tires, Front Specification
26 x 12-12 tubeless 8 ply
Tires, Rear Specification
20 x 10-8 tubeless 6 ply
Electric
Electrical
System: 12-volt, input/output controller. 45/60 amp alternator. Overload protection with automotive type fuses.
Operational
Operating Speed
Mowing: 12 km/h (10mph) variable | Transport: 25 km/h (15.5 mph) variable | Reverse: 6.4 km/h (4 mph) variable
Hydraulics
Hydraulic Oil Cooler
System: 50.2 litre (13.3 gal) capacity reservoir, Parker EO-3 technology, 10 micron remote charge filtration, suction screen at tank, oil cooler side by side radiator, diagnostic test ports. | Cooling: Side by side pressurized hydraulic oil cooler
Dimensions
Dimensions
5 x Type: 197mm (7.8 in.) Diameter, 762mm (30 in.) Wide 8 and 11 Knife Floating | Rollers: 76mm (3 in.) Diameter greasable
Height
Of Cut: 11-blade 9 - 54mm (0.35 - 2.125 in.), 8-blade 12.7 - 54mm (0.5 - 2.125 in.) | 2.11m (83 in.) ROPS Up; 1.70m(67 in.) ROPS & Units Down
Length
3.09m (122 in.) with Cutting Units
Overall Width
Cutting: 3.50m (138 in.)
Width
Transport: 1.89m (75 in.) with Cutting Units at 30mm (1.2 in.) height of cut | Working: 3.75m (148 in.) Cutting Units Down
Capacities
Fuel Capacity
77.1 litre (20.4 gal)
Features
Cutting: 5.1 ha/hr (12.5 ac/hr) at 16.1 kph (10 mph) | 3.78 ha/hr (9.3 ac/hr) at 12.0 kph (7.5 mph) | 2.54 ha/hr (6.3 ac/hr) at 8.0 kph (5.0 mph) (10% allowance for overlap)
Weights
Weight
1912 kg (4215 lbs)
Features
Features
Unit Lift/ Lower: Fingertip operated joysticks for unit lift/lower; cross cut position, hydraulic powered lower for side slopes | Weight Transfer: On demand electrically operated hydraulic weight transfer system | Traction System: Hydrostatic closed loop parallel cross series SureTrac system; variable displacement piston pump; front high torque fixed displacement piston wheel motors; full time auto 4wd forward, on demand in reverse. | Cutting Unit Drive: Direct drive, bi-directional with relief valve protection in both directions | Steering: Q-Amp® Variable rate, hydrostatic powered equal displacement cylinder to rear wheels