With the unique ability to mow with three, four or five reels, and the durability to master the rigors of the deepest rough, the new HF600 provides a legendary quality of cut. The exclusive combination of the industry's widest cut and narrowest transport width gives you the ability to mow between bunkers, around trees or down fairways with ease. A comfortable seat and controls mounted on an adjustable armrest make operation easy and efficient. The pairing of unsurpassed quality of cut and the performance to execute a multitude of applications, including scalping, gives the HF600 unrivaled flexibility.
Unbeatable Power
The highest HP and best power to weight ratio in the industry for more productivity during scalping and verticutting.
Unrivaled Flexibility
The capacity to mow with three, four or five reels allows for maximum flexibility on the course. The widest cut of 138-inches and narrowest transport width in the industry, the HF600 increases productivity and efficiency.
Unassailable Strength
Heavy duty components of reels and lift arms are built to stand up to the harshest tasks and terrain.
Photos
Highlights
Dartmouth, Nova Scotia
2020
Jacobsen®
HF600 Base
Turbo diesel
Available
Transport: 1.89m (75 in.) with Cutting Units at 30mm (1.2 in.) height of cut | Working: 3.75m (148 in.) Cutting Units Down
Of Cut: 11-blade 9 - 54mm (0.35 - 2.125 in.), 8-blade 12.7 - 54mm (0.5 - 2.125 in.) | 2.11m (83 in.) ROPS Up; 1.70m(67 in.) ROPS & Units Down
Specifications
2020
Jacobsen®
HF600
Base
Zero-Turn Mower
Liquid cooled | Side-by-side radiator/hydraulic oil cooler; pressurized; 8 qt (7.6 L) capacity, 8.5 fins per inch
4-cyl
Rated (gross): 48.6 kW (65.2HP) @ 2700 rpm
Kubota® V2403-CR-T-E5
Level: EU Stage IIIB - (EPA Tier 4 Final)
Turbo diesel
Service: Dynamic through traction system
Wet parking brakes integrated into wheel motors
26 x 12-12 tubeless 8 ply
20 x 10-8 tubeless 6 ply
System: 12-volt, input/output controller. 45/60 amp alternator. Overload protection with automotive type fuses.
Mowing: 12 km/h (10mph) variable | Transport: 25 km/h (15.5 mph) variable | Reverse: 6.4 km/h (4 mph) variable
System: 50.2 litre (13.3 gal) capacity reservoir, Parker EO-3 technology, 10 micron remote charge filtration, suction screen at tank, oil cooler side by side radiator, diagnostic test ports. | Cooling: Side by side pressurized hydraulic oil cooler
Of Cut: 11-blade 9 - 54mm (0.35 - 2.125 in.), 8-blade 12.7 - 54mm (0.5 - 2.125 in.) | 2.11m (83 in.) ROPS Up; 1.70m(67 in.) ROPS & Units Down
3.09m (122 in.) with Cutting Units
Cutting: 3.50m (138 in.)
Transport: 1.89m (75 in.) with Cutting Units at 30mm (1.2 in.) height of cut | Working: 3.75m (148 in.) Cutting Units Down
77.1 litre (20.4 gal)
Unit Lift/ Lower: Fingertip operated joysticks for unit lift/lower; cross cut position, hydraulic powered lower for side slopes | Weight Transfer: On demand electrically operated hydraulic weight transfer system | Traction System: Hydrostatic closed loop parallel cross series SureTrac system; variable displacement piston pump; front high torque fixed displacement piston wheel motors; full time auto 4wd forward, on demand in reverse. | Cutting Unit Drive: Direct drive, bi-directional with relief valve protection in both directions | Steering: Q-Amp® Variable rate, hydrostatic powered equal displacement cylinder to rear wheels
