2020 Jacobsen® LF510 4WD
- Year 2020
- Make Jacobsen®
- Model LF510
2020 Jacobsen® LF510 4WD
2020 Jacobsen® LF510 4WD
- The newest addition to Jacobsen's legendary line of LF mowers, the LF510 provides superior quality-of-cut, fits the budget and is a simple Tier 4 Final emission regulation solution.
- Features Jacobsen's new TrueSet cutting units with Classic XP reels for fast bedknife-to-reel adjustment and industry-leading holding power to deliver a clean and consistent quality-of-cut.
- The lightweight mower design distributes less than 10 psi of operating ground pressure on the turf.
- Affordability from the start and through its life with 100 in. (2.54 m) of productivity and simplified maintenance including wet park brakes, an onboard control module, and easily accessible routine service items.
- Powered by a rugged and reliable Kubota Tier 4 Final engine for simple emission compliance.
- Note: The LF510 2WD without ROPS is for use in specific applications on level ground with no potential of roll over. This unit is NOT for use on hills or slopes. Jacobsen recommends the use of a certified ROPS and seat belt in all instances where hills or slopes may be encountered - optional ROPS with seat belt kit required.
Engine
Air Cleaner
Dry cartridge type with evacuator, valve and service indicator
Cooling System
Liquid cooled | Pressurized, sealed cooling system
Cylinder Liners
3-cylinder
Displacement
1.12 L
Engine Type
Kubota® D1105E
Engine Power
Rated: 18.6 kW @ 3000 rpm
Emissions
Low-emissions certified diesel | Level: EPA Tier 4 Final (EU Stage IIIA)
Lubrication
Fully pressurised
Brakes
Brake System Type
Dynamic, through-traction
Parking Brake
Automatic wet park brake integrated in front wheel motors; engage switch on control console
Electric
Electrical
System: 0.8 kW starter 40 amp alternator/regulator
Operational
Ground Pressure
0.7 kg/cm²
Operating Speed
Mowing: 12.9 km/h | Transport: 16 km/h | Reverse: 6.4 km/h | Cutting Frequency 7 blade: 1.88 mm/km/h
Oil Filter
Full-flow, replacement spin-on type
Hydraulics
Hydraulic Flow
System: oil monitor with low-oil alarm standard
Hydraulic Oil Cooler
Oil cooler; large-volume, full-flow 10 micron filter
Dimensions
Dimensions
Front Tires Tubeless: 26.5 x 14.0-12 | Rear Tires Tubeless: 20.0 x 10.0-8 | Number and Size Five diameter: 12.7 cm x 55.9 cm
Height
Of-Cut Range: 9.5-19.0 mm | With ROPS: 2.23 m
Length
2.74 m
Overall Width
Cutting: 2.54 m
Width
2.92 m | Transport: 2.2 m
Capacities
Fuel Capacity
64.4 L
Features
Hydraulic System: 53 L
Weights
Weight
With Reels Up 4WD: 1278 kg | With Reels Down 4WD: 995 kg
Features
Features
Traction System: Variable displacement, hydrostatic pump with 2 high-torqued wheel motors; 4WD models: SureTrac™ parallel-cross-series traction system | Reel Drive: Gear pump with quick disconnect (FlashAttach) coupled reel motors, solenoid controlled mow valve; backlapping standard. Mow Speed Limiter: Foot Activated Lever | Reel Lift: Joystick control, one-touch lift/lower control for all five reels | Steering: Rear-wheel, hydrostatic power steering | Number of Blades: 7 heavy section fairway blades / Diagnotics: Onboard electronic control module with light-emitting diode display and alarms for aid in diagnostics. | Controls: Gauges: Fuel gauge, hour meter, and indicator warning lights: diagnostics list, glow plug indicator high engine coolant temperature, engine oil pressure, and battery voltage.