2020 Jacobsen® MH5 Base
- Year 2020
- Make Jacobsen®
- Model MH5
2020 Jacobsen® MH5 Base
2020 Jacobsen® MH5
- The Jacobsen MH5 tractor-mounted large area reel mower provides a unique, cost-effective alternative to traditional reel mowers. With the ability to mow, verticut or scalp down, the MH5 turns your tractor into a versatile and efficient turf maintenance tool. Achieve excellent ground contour following and productivity with fully floating cutting units and a 135 in. width-of-cut. Each reel is hydraulically driven with enough power and ruggedness to handle even the toughest conditions.
- Simple design for easy operation and maintenance.
- Individually hydraulically controlled reels allows operation of three, four or all five reels to maintain tight spaces or provide added power to each reel for especially tough jobs.
- Maintain peak performance and lower oil temperature in even the hottest of climates with thermally actuated electric fan.
- Reel drive operates in forward for mowing or reverse for easy backlapping.
Engine
Engine Power
Minimum: 29.2 kW; 36.7 kW recommended
Drivetrain
Drive System
Cutting Unit: Fixed displacement hydraulic motors | Hydraulically driven off of tractor PTO
Brakes
Parking Brake
Wet parking brakes integrated into hweel motors
Electric
Electrical
O.8 kW starter, input/output controller. 60 amp alternator. Overload protection with automative type fuses.
Operational
Operating Speed
6-spline 540 rpm PTO shaft | Cutting Performance (area): 4.1 ha/h at 12 km/h
Hydraulics
Hydraulic Oil Cooler
Oil cooler with thermally actuated electric fan
Dimensions
Dimensions
Tractor Requirements Standard: 40 mm diameter
Height
Free Standing: 0.98 m | Of Cut Floating Head: 8 mm to 49 mm | Of Cut Adjustment: Adjustable screw with height-of-cut indication
Length
1.11 m
Width
Transport: 2.50 m | Of Cut: 3.43 m
Capacities
Fuel Capacity
Tank Hydraulic: 82 L
Weights
Weight
600 kg
Features
Features
Lift System: Attaches to tractors with category 1 or 2 three point linkage | Cutting Type: Type Five 19.8 cm diameter reels with 6 or 8 blades; verticut reels available
Chassis
Chassis
Type: Welded and bolted hollow box section frame; cutting cylinder drive control lever for forward and reverse backlapping