The Jacobsen MH5 tractor-mounted large area reel mower provides a unique, cost-effective alternative to traditional reel mowers. With the ability to mow, verticut or scalp down, the MH5 turns your tractor into a versatile and efficient turf maintenance tool. Achieve excellent ground contour following and productivity with fully floating cutting units and a 135 in. width-of-cut. Each reel is hydraulically driven with enough power and ruggedness to handle even the toughest conditions.
Simple design for easy operation and maintenance.
Individually hydraulically controlled reels allows operation of three, four or all five reels to maintain tight spaces or provide added power to each reel for especially tough jobs.
Maintain peak performance and lower oil temperature in even the hottest of climates with thermally actuated electric fan.
Reel drive operates in forward for mowing or reverse for easy backlapping.
Photos
Highlights
Dartmouth, Nova Scotia
2020
Jacobsen®
MH5 Base
Type: Welded and bolted hollow box section frame; cutting cylinder drive control lever for forward and reverse backlapping
Available
Transport: 2.50 m | Of Cut: 3.43 m
Free Standing: 0.98 m | Of Cut Floating Head: 8 mm to 49 mm | Of Cut Adjustment: Adjustable screw with height-of-cut indication
Specifications
2020
Jacobsen®
MH5
Base
Zero-Turn Mower
Minimum: 29.2 kW; 36.7 kW recommended
Cutting Unit: Fixed displacement hydraulic motors | Hydraulically driven off of tractor PTO
Wet parking brakes integrated into hweel motors
O.8 kW starter, input/output controller. 60 amp alternator. Overload protection with automative type fuses.
6-spline 540 rpm PTO shaft | Cutting Performance (area): 4.1 ha/h at 12 km/h
Oil cooler with thermally actuated electric fan
Tractor Requirements Standard: 40 mm diameter
Free Standing: 0.98 m | Of Cut Floating Head: 8 mm to 49 mm | Of Cut Adjustment: Adjustable screw with height-of-cut indication
1.11 m
Transport: 2.50 m | Of Cut: 3.43 m
Tank Hydraulic: 82 L
600 kg
Lift System: Attaches to tractors with category 1 or 2 three point linkage | Cutting Type: Type Five 19.8 cm diameter reels with 6 or 8 blades; verticut reels available
Type: Welded and bolted hollow box section frame; cutting cylinder drive control lever for forward and reverse backlapping
