The Jacobsen TurfCat® is a multi-purpose machine that provides the lowest cost of ownership in its class. The simple yet powerful design is efficient to operate and easy to maintain. It can mow down thick grass or produce the fine cut striping effects required for sports fields and other applications or remove debris and snow.
Hydraulic deck and traction drives are easier to maintain than mechanical systems. No gear box, belts, pulleys, drive shaft or clutch to worry about. Eliminating over 15 grease points and 212 service parts compared to competitive products.
Nine different deck configurations with 60, 63 or 72 in. (1.5, 1.6 or 1.8 m) widths-of-cut, with rear discharge, side discharge and mulching options as well as a fine cut flail
Multipurpose fine-cut flail deck option is rugged, provides safe downward discharge of debris and a beautiful striping effect with easy adjustment. It can also be used as an aerification core destroyer.
2WD or 4WD for operating on various types of terrain.
Year round use with available cab, rotary brush, plow, snow blower and turbine blower.
Photos
Highlights
Dartmouth, Nova Scotia
2020
Jacobsen®
TurfCat 2WD
Diesel
Available
1.32 m
ROPS Up: 2.12 m | ROPS Folded: 1.45 m | Cab Installed: 2.13 m
Specifications
2020
Jacobsen®
TurfCat
2WD
Zero-Turn Mower
Liquid cooled
3-cylinder
1.12 L
Kubota® D1105 E4B
18.5 kW
EPA Tier 4 Final - (EU Stage V)
System: Fully Pressurised
Diesel
Service: Hydrostatic
Foot pedal actuated parking brake
23 x 10.5, 4-ply, turf tread
20 x 10, 4-ply, turf tread
Caster Wheels: Side Discharge: Two 11 x 4.5 pneumatic, tubeless, 4-ply / Rear Discharge: Two 9 x 3.5 semi-pneumatic
System: 12-volt, input/output controller. 60 amp alternator. Overload protection with automotive type fuses.
0.7 kg/cm²
Mowing: 16 km/h | Transport: 16 km/h | Reverse: 6.4 km/h
System: 25.7 L capacity
Full-flow filter with oil cooler
Full-flow, replacement spin-on type
ROPS Up: 2.12 m | ROPS Folded: 1.45 m | Cab Installed: 2.13 m
2.2 m
Cutting: 1.52 m, 1.60 m, 1.82 m
1.35 m
1.32 m
34 L
Traction System: Variable displacement hydraulic pump directly mounted to engine; individual hydraulic wheel motors. | Deck Drive: Hydraulic PTO with hydraulic gear pump and motor with electro-hydraulic control valve | Deck Lift/Lower: Fingertip operated joysticks for individual deck lift/lower; cross cut position; front deck service position with lock pin. Electronic safety locks. | Steering: Hydrostatic rear wheel steering | Cutting Unit Lift: Switch operated, electro hydraulic lift system | Motor/Spindle: Fixed displacement hydraulic spindle motor with 1 in. diameter shaft, self lubricated bearings | Weight Transfer: Hydraulic weight transfer adjustable under seat
