2020 Ryan® Tracaire® Aerator Base
- Year 2020
- Make Ryan®
- Model Tracaire® Aerator
- Engine Power: Tractor mounted
2020 Ryan® Tracaire® Aerator Base
2020 Ryan® Tracaire® Aerator
The Tracaire® 72-inch aerator is the only choice for athletic fields and other large, flat, high traffic areas with compaction issues.The hardened alloy steel tines aerate four inches down into even the most challenging surfaces, allowing deep-rooted grass to prosper in even the harshest conditions. An option of coring or spoon or slicing knives provides versatility, while cast iron tine wheels with sintered bushings add durability and reduce maintenance. Tow the Tracaire® aerator with a category “1” 3-point hitch and marvel at its resiliency – not to mention that of the resulting turf.
Features may include:
- The cast iron aeration wheels have eight tines per wheel standard. Another eight tines can be installed on the wheel doubling the amount of material removed during coring.
- Effortlessly connect the Tracaire to a wide variety of tractors with its durable 3-point hitch configuration.
- For a beautiful, healthy lawn you need to get air, water and nutrients down into the root zone. To learn more click here.
Engine
Engine
Power: Tractor mounted
Lubrication
Pressure grease fittings at pivot points and tine wheels
Wheels & Tires
Tires, Front Specification
8 per wheel (96 total); standard one set 0.75 in. (19 mm) coring; wheels can be mounted with double set of tines, 16 per wheel (192 total)
Tires, Rear Specification
8 per wheel (96 total); standard one set 0.75 in. (19 mm) coring; wheels can be mounted with double set of tines, 16 per wheel (192 total)
Operational
Operating Conditions
Productivity: 3 acres/hr (1.2 ha/hr) at 4 mph (6 km/hr)
Chassis
Hitch/Type
Standard 3-point tractor hitch, category “1”
Dimensions
Dimensions
Aerating Wheel Axle: 1.25 in. (32 mm) diameter | Aerating Wheels: 12, cast iron with sintered bushings; pressure lubrication fitting; grooved for mounting aerating tines on both sides; each wheel weighs 75 lb (34 kg) | Aeration Pattern: 6 in. x 6 in. (152 mm x 152 mm) with single tines; 3 in. x 3 in. (76 mm x 76 mm) with double tines | Holes per SqFt: Up to 9 sq ft (.84 m2 ) with single tines; up to 18 sq ft (1.7 m2 ) with double tines
Length
48 in. (1,219 mm)
Width
Aerating: 72 in. (1,829 mm) | 78 in. (1,981 mm)
Height
24 in. (610 mm)
Depth, Maximum
Coring: Up to 4 in. (102 mm)
Weights
Weight
1,052 lb (477 kg)