2020 Ryan® Tracaire® Aerator Base

Information

2020 Ryan® Tracaire® Aerator

The Tracaire® 72-inch aerator is the only choice for athletic fields and other large, flat, high traffic areas with compaction issues.

The hardened alloy steel tines aerate four inches down into even the most challenging surfaces, allowing deep-rooted grass to prosper in even the harshest conditions. An option of coring or spoon or slicing knives provides versatility, while cast iron tine wheels with sintered bushings add durability and reduce maintenance. Tow the Tracaire® aerator with a category “1” 3-point hitch and marvel at its resiliency – not to mention that of the resulting turf.

Features may include:

  • The cast iron aeration wheels have eight tines per wheel standard. Another eight tines can be installed on the wheel doubling the amount of material removed during coring.
  • Effortlessly connect the Tracaire to a wide variety of tractors with its durable 3-point hitch configuration.
  • For a beautiful, healthy lawn you need to get air, water and nutrients down into the root zone. To learn more click here.

Photos

Highlights

  • Dartmouth, Nova Scotia
  • 2020
  • Ryan®
  • Tracaire® Aerator Base
  • Power: Tractor mounted
  • Available
  • Aerating: 72 in. (1,829 mm) | 78 in. (1,981 mm)
  • 24 in. (610 mm)

Specifications

  • 2020
  • Ryan®
  • Tracaire® Aerator
  • Base
  • General
  • Power: Tractor mounted
  • Pressure grease fittings at pivot points and tine wheels
  • 8 per wheel (96 total); standard one set 0.75 in. (19 mm) coring; wheels can be mounted with double set of tines, 16 per wheel (192 total)
  • 8 per wheel (96 total); standard one set 0.75 in. (19 mm) coring; wheels can be mounted with double set of tines, 16 per wheel (192 total)
  • Productivity: 3 acres/hr (1.2 ha/hr) at 4 mph (6 km/hr)
  • Standard 3-point tractor hitch, category “1”
  • Aerating Wheel Axle: 1.25 in. (32 mm) diameter | Aerating Wheels: 12, cast iron with sintered bushings; pressure lubrication fitting; grooved for mounting aerating tines on both sides; each wheel weighs 75 lb (34 kg) | Aeration Pattern: 6 in. x 6 in. (152 mm x 152 mm) with single tines; 3 in. x 3 in. (76 mm x 76 mm) with double tines | Holes per SqFt: Up to 9 sq ft (.84 m2 ) with single tines; up to 18 sq ft (1.7 m2 ) with double tines
  • 48 in. (1,219 mm)
  • Aerating: 72 in. (1,829 mm) | 78 in. (1,981 mm)
  • 24 in. (610 mm)
  • Coring: Up to 4 in. (102 mm)
  • 1,052 lb (477 kg)