2020 Ryan® Lawnaire® IV with EST Briggs Stratton

Information

2020 Ryan® Lawnaire® IV with EST Briggs Stratton

Legendary Lawnaire® Performance and Durability Now with EST – Easy Steer Technology.

The newly redesigned tine assembly allows the user to steer the unit without taking the tines out of the ground. This is accomplished by designing each tine assembly to independently rotate yet be able to drive. This translates into higher productivity and less physical stress on the operator because it is easier to use.

The same convenient features and durability as the standard Lawnaire® plug aerator units.

The new Lawnaire® Aerator with Easy Steer Technology has the same valuable features that are found on the standard Lawnaire aerators, such as, removable weights, front bumper guard and throttle control up by the operator area. These aerators are ideal for lawn care operators who know that time means money, and for rental houses that want to offer their customers the best lawn care equipment in the market.

Features may include:

  • Proven Machine Design that has been greatly enhanced.
  • Redesigned tine assembly enables unit to be turned with tines in the ground, increasing productivity and reducing operator effort.
  • Weights are easily and conveniently removable for easier lifting and quicker, less strenuous transport.
  • For a beautiful, healthy lawn you need to get air, water and nutrients down into the root zone. To learn more click here.

Photos

Highlights

  • Dartmouth, Nova Scotia
  • 2020
  • Ryan®
  • Lawnaire® IV with EST Briggs Stratton
  • Briggs & Stratton Vanguard
  • Available
  • Aerating: 19 in. (483 mm) | 28 in. (711 mm)
  • 48.8 in. (1,240 mm); 30 in. (762 mm) w/handle folded

Specifications

  • 2020
  • Ryan®
  • Lawnaire® IV with EST
  • Briggs Stratton
  • General
  • Briggs & Stratton Vanguard
  • recoil start
  • 4-cycle
  • dual air cleaner; low-tone muffler
  • 12.5 cu. In. (205 cc)
  • Belt tightener
  • (2) 8x2.25 semi-pneumatic w/ball bearings
  • (2) 8x2.25 semi-pneumatic w/ball bearings
  • on/off switch
  • Productivity: Aerates up to 29,000 sq ft/hr (2,694 m2 /hr) at 3.5 mph (4.83 kph)
  • Primary: 4L section V-belt | Tine & Drum: Single #40 nickel-plated chain
  • Core Diameter: 0.75 in. (19 mm) | Aeration Pattern: 3.75 in. x 7 in. (95 mm x 178 mm) | Holes per Sq Ft: up to 9 sq ft (.5 m2 )
  • Tines: 0.75 in. (19 mm) diameter coring type formed from 0.08 in. (2 mm) hollow, hardened alloy steel
  • Aerating: 19 in. (483 mm) | 28 in. (711 mm)
  • 53.5 in. (1,359 mm)
  • 48.8 in. (1,240 mm); 30 in. (762 mm) w/handle folded
  • Coring: Up to 2.75 in. (70 mm)
  • 0.84 gal. (3.3 L)
  • 0.63 qt (0.6 L)
  • Wet w/o Weights: 214 lb (97 kg) | Wet w/Weights: 255 lb (116 kg) | Wet w/Weights and Water in Drum: 298 lb (135 kg)
  • Number of Tines: 30 tines per aerator | Lubrication: Grease zerks on the wheels & idler pivot / oil chain