2020 Ryan® Lawnaire® V Briggs & Stratton
- Year 2020
- Make Ryan®
- Model Lawnaire® V
- Engine Briggs & Stratton Vanguard
2020 Ryan® Lawnaire® V Briggs & Stratton
2020 Ryan® Lawnaire® V Briggs & Stratton
The Lawnaire® V aerator offers the same convenient features and durability as the Lawnaire® IV aerator. But when you need to aerate a larger area faster, there’s no better choice than this coring, drum-type aerator.With a 26.5-inch swath and quick ground speeds, you can cover up to 40,000 square feet in an hour. Covered lift grips and a front bumper guard make tying down for transportation easy, as well as add protection from damage. Removable rear wheels simplify maneuvering in tight areas and let you pass through gates and down narrow paths with ease. For rental houses that want to offer their customers the foremost lawn equipment, and for lawn care contractors who know that time means money, the Lawnaire® V aerator simply can’t be beat.
Features may include:
- Standard ¾", hardened alloy steel coring tines keep this durable machine out of the shop and out on the job.
- A full water drum provides improved traction and increases penetration depth in harder soils.
- Weights are easily and conveniently removable for easier lifting and quicker, less strenuous transportation.
Engine
Engine
Briggs & Stratton Vanguard
Starter
recoil start
Cycle Time
4-cycle
Air Cleaner
dual air cleaner; low-tone muffler
Displacement
12.5 cu. In. (205 cc)
Drivetrain
Clutch
Belt tightener
Wheels & Tires
Tires, Front Specification
(2) 8x2.25 semi-pneumatic w/ball bearings
Tires, Rear Specification
(2) 8x2.25 semi-pneumatic w/ball bearings
Electric
Electrical
on/off switch
Operational
Operating Conditions
Productivity: Aerates up to 40,000 sq ft/hr (3,716 m2 /hr) at 3.5 mph (4.83 kph)
Drive System
Primary: 4L section V-belt | Tine & Drum: Single #40 nickel-plated chain
Dimensions
Dimensions
Core Diameter: 0.75 in. (19 mm) | Aeration Pattern: 3.75 in. x 7 in. (95 mm x 178 mm) | Holes per Sq Ft: Up to 9/ sq ft (.59 / m2 )
Tine Diameter
Tines: 0.75 in. (19 mm) diameter coring type formed from 0.08 in. (2 mm) hollow, hardened alloy steel
Width
Aerating: 26.5 in. (673 mm) | 35.5 in. (902 mm)
Length
53.5 in. (1,359 mm)
Height
48.5 in. (1,232 mm)
Depth, Maximum
Coring Depth: Up to 2.75 in. (70 mm)
Capacities
Fuel Capacity
0.84 gal. (3.3 L)
Oil capacity
0.63 qt (0.6 L)
Weights
Weight
Wet w/o Weights: 250 lb (113 kg) | Wet w/Weights: 292 lb (132 kg) | Wet w/Weights and Water in Drum: 357 lb (162 kg)
Features
Features
Number of Tines: 42 tines per aerator | Lubrication: Grease zerks on the wheels & idler pivot / oil chain