2020 STIHL Gas Chain Saws For Property Maintenance MS 211

2020 STIHL Gas Chain Saws For Property Maintenance MS 211

Low vibration and emission compact saw

The MS 211, a low vibration chain saw powered by a low emission and fuel-efficient stratified scavenging engine, features a pre-separation air filtration system that moderates upkeep by extending the cleaning life of the air filter. It comes equipped with a carburetor preheat shutter for summer/winter operation. This saw is perfect for felling small trees, sawing firewood around the home or farm, and is part of STIHL’s new generation of fuel-efficient, environmentally friendly chain saws.

Features may include:

• Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

• 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

• Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

• STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

• Special caps to open and close the tank cap quickly, easily and without tools.

• Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

• The tensioning screw can be found on the side of chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

• All important functions such as start, choke, throttle and stop are operated via a single lever.

• Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting