2020 Toro Directional Drill DD4050
- Year 2020
- Make Toro
- Model Directional Drill
- Engine Cummins QSB4.5, liquid-cooled, diesel
2020 Toro Directional Drill DD4050
2020 Toro Directional Drill DD4050
The Toro DD4050 provides the optimal ratio of thrust/pullback and torque performance to footprint – with a width of only 85”, consistent 40,000 lb of thrust and pullback, and 5,000 ft-lb of rotation torque. Additionally, the newly designed drill operating system, TDOS-1, delivers single-screen drill performance information and intuitive navigation to enhance operator productivity.
Engine
Engine
Cummins QSB4.5, liquid-cooled, diesel
Rated Engine Speed
2,300 RPM
Emissions
Compliance: Tier 4 Final
Engine Torque
5,000 ft-lbs (6,101 N-m)
Engine Power
Gross Power Rating: 160 hp (119 kW)
Displacement
272 cu. in. (4.5 L)
PTO
PTO Power, Rated Engine Speed
Rotarty Speed (Maximum): 225 RPM
Injection Pump Type
Direct
Drivetrain
Drive Control
Single or dual joystick
Operational
Top Speed
Maximum Ground Travel Speed: 3.25 mph (5.2 km/h)
Operating Speed
Carriage Travel Speed (Thrust/Pullback): 150 ft/min (46 m/min)
Hydraulics
Hydraulic Flow
Maximum: 70 gpm (265 L/min)
Maximum Pressure
1,300 psi (90 Bar)
Dimensions
Length
257" (653 cm) | Drill Pipe: 10' (305 cm)
Height
86.25" (219)
Dimensions
Drill Pipe Outside Diameter: 2.375" (61 mm) | Minimum Bend Radius: 108.2' (33 m) | Drill Angle Entry: 16 degrees | PipeTool Joint Outside Diameter: 2.75" (70 mm)
Width
85" (216 cm)
Capacities
Oil capacity
Engine: 11.6 qt (11 L)
Features
Thrust/Pullback Force: 40,000 lbs (18 Tonnes) | Pipe Carrying Capacity: 520' (159 m) (52 pieces)
Fuel Capacity
67 gallons (254 L)
Weights
Weight
17,460 lbs (7,920 kg) without drill pipe