2020 Toro Directional Drill DD4050

Information

2020 Toro Directional Drill DD4050

The Toro DD4050 provides the optimal ratio of thrust/pullback and torque performance to footprint – with a width of only 85”, consistent 40,000 lb of thrust and pullback, and 5,000 ft-lb of rotation torque. Additionally, the newly designed drill operating system, TDOS-1, delivers single-screen drill performance information and intuitive navigation to enhance operator productivity.

Photos

Highlights

  • Dartmouth, Nova Scotia
  • 2020
  • Toro
  • Directional Drill DD4050
  • Cummins QSB4.5, liquid-cooled, diesel
  • Available
  • 85" (216 cm)
  • 86.25" (219)

Specifications

  • 2020
  • Toro
  • Directional Drill
  • DD4050
  • Directional
  • Cummins QSB4.5, liquid-cooled, diesel
  • 2,300 RPM
  • Compliance: Tier 4 Final
  • 5,000 ft-lbs (6,101 N-m)
  • Gross Power Rating: 160 hp (119 kW)
  • 272 cu. in. (4.5 L)
  • Rotarty Speed (Maximum): 225 RPM
  • Direct
  • Single or dual joystick
  • Maximum Ground Travel Speed: 3.25 mph (5.2 km/h)
  • Carriage Travel Speed (Thrust/Pullback): 150 ft/min (46 m/min)
  • Maximum: 70 gpm (265 L/min)
  • 1,300 psi (90 Bar)
  • Drill Pipe Outside Diameter: 2.375" (61 mm) | Minimum Bend Radius: 108.2' (33 m) | Drill Angle Entry: 16 degrees | PipeTool Joint Outside Diameter: 2.75" (70 mm)
  • 257" (653 cm) | Drill Pipe: 10' (305 cm)
  • 86.25" (219)
  • 85" (216 cm)
  • Engine: 11.6 qt (11 L)
  • Thrust/Pullback Force: 40,000 lbs (18 Tonnes) | Pipe Carrying Capacity: 520' (159 m) (52 pieces)
  • 67 gallons (254 L)
  • 17,460 lbs (7,920 kg) without drill pipe