2022 Ryan® Lawnaire® V Base
- Year 2022
- Make Ryan®
- Model Lawnaire® V
- Engine Honda® GX120
2022 Ryan® Lawnaire® V
TESTED. TRIED. PROVENWith Easy Steer Technology, the Lawnaire IV & V maneuver around highly landscaped areas fast and efficiently. Designed to rotate independently while driving, innovative tine assemblies allow you to steer without removing the tines from the ground—opening up a whole new world of productivity
Features may include:
3/4" (19MM) DIAMETER STEEL CORING TINES- Unlike everyone else, our hardened alloy steel coring tines stay in the ground when you turn—and durable enough to keep you out on the turf and out of the shop.
- Feel confident with your investment with a sturdy front bumper guard, protecting vital components from accidents and mistakes.
- Get the exact down pressure and weight distribution you need by attaching or removing weights or adding water to the front drum.
- Facing tight terrain and landscaping? The Lawnaire IV fits with its 19-inch aeration width. Need to maximize your productivity? The Lawnaire V has you covered with 26.5-in aeration width.
- Save your strength with Easy Steer Technology and easily maneuver along paths and contours or when pulling off a 180° turn. Outer tines rotate faster during turns to maintain deep core penetration without tearing up turf, increasing your productivity without sacrificing quality.
- Remove weights to make it easier to lift. Or fold up its handles to make it compact for small trailers. Or remove rear wheels if you’re in a tight space. Durable and lightweight, this machine transports from job to job with ease.
Engine
Engine
Honda® GX120
Starter
Recoil start
Cycle Time
4-cycle
Displacement
7.2 cu in. (118 cc)
Lubrication
Lubrication: Grease zerks on the wheels & idler pivot / oil chain
Drivetrain
Clutch
Belt tightener
Wheels & Tires
Tires, Rear Specification
(2) 8 x 2.25 semi-pneumatic with ball bearings
Electric
Electrical
On/off switch
Operational
Operating Conditions
Productivity: Aerates up to 40,000 sq ft/hr (3,716 m2/hr) at 3.5 mph
Drive System
Primary: 4L section V-belt | Tine & Drum: Single #40 nickel-plated chain
Dimensions
Dimensions
Core Diameter: 0.75 in. (19 mm) | Aeration Pattern: 3.75 in. x 7 in. (95 mm x 178 mm) | Holes per Sq Ft: Up to 9 per sq ft (59/m2)
Tine Diameter
Tines: 0.75 in. (19 mm) diameter coring-type formed from 0.08 in. (2 mm) hollow, hardened alloy stee
Width
Aerating: 26.5 in. (673 mm) | 35.5 in. (902 mm)
Length
35.5 in. (902 mm)
Height
48.5 in. (1,232 mm)
Depth, Maximum
Coring: Up to 2.75 in. (70 mm)
Capacities
Fuel Capacity
0.53 gal (2 L)
Oil capacity
0.59 qt (0.56 L)
Weights
Weight
Wet w/o Weights: 250 lb (113 kg) | Wet w/Weights: 292 lb (132 kg) | Wet w/Weights and Water in Drum: 357 lb (162 kg)
Features
Features
Number of Tines: 42 tines per aerator