Halifax Kubota

  • 580 Wright Ave #100
  • Dartmouth, NS B3B 0H8
  • Call Us: (902) 468-8873
  • https://www.halifaxkubota-fr.com/
Print This Page

2024 Toro Greensmaster® 3150/3250 3150-Q (04358)

Information

2024 Toro Greensmaster® 3150/3250 3150-Q (04358)

The Greensmaster 3150-Q is distinguished for its field-proven performance and exceptional quality of cut. Equipped with patented DPA cutting units for a superior cut and minimal maintenance, convenient controls for easy operation, and ample power to handle any application–it’s no wonder this classic model has been trusted over the years to deliver the performance golf courses demand with a putting surface that exceeds expectations.

Features may include:

Safe Operation
  • The placement of the center cutting unit, located between the the front traction wheels, along with the front center basket removal, allows a low mounting design of the transmission and engine. This lowers the center of gravity, giving the machine much higher hillside stability.
Perfect Triangle Wheel Stand Design
  • The Triangle Wheel Stand places the rear wheel track within the radius of the front wheel, which prevents accidentally dropping the rear wheel into a nearby sand bunker while making the turn for the next mowing path.
Maintenance Ease
  • All components, especially those that require daily inspection and routine maintenance, are conveniently located for servicing. The Greensmaster® 3250 has fewer hydraulic lines and connectors. All hydraulic components are positioned for easy visual inspection.
Leak Detection
  • The dependable Turf Guardian™ leak detection technology alerts the operator if a leak occurs.
DPA Cutting Units
  • The most advanced cutting unit in the industry:
  • Only two adjustments
  • Superior height-of-cut retention
  • No daily greasing (stainless steel bearings)
  • Consistent cutting location edge regardless of reel wear (patented)
  • Smallest bedknife increment adjustments .007inch (.178mm)

Photos

Highlights

  • Dartmouth, Nova Scotia
  • 2024
  • Toro
  • Greensmaster® 3150/3250 3150-Q (04358)
  • Briggs and Stratton®
  • Gasoline
  • Available
  • 74.5" (189 cm) | of Cut Range: Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.

Specifications

  • 2024
  • Toro
  • Greensmaster® 3150/3250
  • 3150-Q (04358)
  • Riding
  • Briggs and Stratton®
  • Air Cooled
  • 18 hp (13.4 kW) @ 3600 rpm
  • Hydraulic
  • 2850 rpm high idle, 1650 rpm low idle.
  • Gasoline
  • Gas | Implement: Single gear pump, mono valve block, series reel drive to 3 motors. | Traction Drive: 2WD
  • Adjustable steering wheel tilt and a 5-position steering arm tilt.
  • Hydraulic piston pump, closed loop system. 2WD Parallel Hydrostatic. Foot pedal forward and reverse; infinitely variable.
  • Foot activated with two 6" (15.2 cm)
  • drum type brakes mounted on the front wheel motors.
  • 12V
  • Frequency/Backlapping: Adjustable up to 1975 RPM at 2850 engine RPM. Backlapping standard. | System: 12-volt lead acid, group size U1, with 300 minimum CCA at 0° F. 16 amp alternator. Seat switch.
  • 18" x 10.5" - 8", 4-ply, Smooth Tread
  • 18" x 10.5" - 8", 4-ply, Smooth Tread
  • Ground Speed - Forward: 0 - 10 mph (0 - 16.1 km/h) | Mowing Speed: 2 - 5 mph (3.2 - 8 km/h)
  • Sound Power: Roll Over Protection System standard. Sound level of 82 dB(A) at operator’s ear under normal conditions.
  • Blade: 5" (13 cm) | Weldment shaft: 1.375" (35 mm) | Reel Diameter: 5 in. (12.7 cm)
  • 90" (229 cm) | Blade: 21" (53.3 cm)
  • 74.5" (189 cm) | of Cut Range: Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.
  • 69.7" (177 cm) with reels
  • 47" (119 cm)
  • 59" (150 cm)
  • 7 U.S. gal. (26.5 L)
  • 1,087 lbs. (493 kg)
  • Bedknife: Replaceable single-edged EdgeMax™ Microcut Bedknife is standard. | Blade Style/Type: Reel | Number of Blades: 11, 14, 8
  • Cutting Unit Type/Configuration: Cutting units are completely free-floating, each attaching to the tractor by direct pull links and lifted by a centered lift arm. Baskets are supported by carrier frames that are ground following. Cutting unit floatation is unaffected by basket content. Grass baskets are all interchangeable and accessible from the front of the machine. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)
  • Hour Meter