2024 Toro Reelmaster® 3555/3575 3575-D with 7" (03821)

Information

2024 Toro Reelmaster® 3555/3575 3575-D with 7" (03821)

The Reelmaster® 3575-D 7-inch reel mower provides productivity, efficiency, and simplicity. The 100 inch width of cut and lighter weight makes it perfect for sports fields and fairways. This mower was designed to be over 20% lighter and much more compact than traditional Toro reel mowers. You get the performance you come to expect from Toro in a size that is not only highly maneuverable, but is also engineered to decrease turf compaction.

Features may include:

Lightweight Design
  • With a weight that is 20 percent lighter than a comparably equipped Toro 4-wheel drive reel machine, the Reelmaster 3575-D provides the ideal combination of turf friendliness and productive performance.
Quiet Operation
  • The Reelmaster 3575-D has a quiet, low noise design with only 84 dB(A) at the operator's ear & 73 dB(A) at a 25-foot drive by.
Three Wheel Design
  • The three wheel design is highly maneuverable which maximizes productivity. Smooth, turf-friendly tires significantly decrease potential for turf tear in tight turns. The 100 inch (2.5 m) cutting width and up to 7 mph (11.3 km/hr) mowing speed make the 3575-D fast and effective.
Engine Efficiency
  • Powered by a 24.8 hp (18.5 kW) Kubota diesel engine. The Reelmaster 3575-D provides plenty of power to climb hills, even while operating groomers and rear roller brushes, yet it uses less fuel per acre than a traditional fairway mower.
Superior Traction
  • The innovative Series/Parallel 3-wheel drive system provides power to at least two wheels at all times. The result is impressive traction in hilly and wet conditions, and minimal wheel slip so it’s gentle on the turf.

Photos

Highlights

  • Dartmouth, Nova Scotia
  • 2024
  • Toro
  • Reelmaster® 3555/3575 3575-D with 7" (03821)
  • Kubota® liquid-cooled diesel
  • Diesel / Biodiesel
  • Available
  • 81" (206 cm) | of Cut Range: 0.25" (6.4 mm) - 1.5" (38.1 mm)

Specifications

  • 2024
  • Toro
  • Reelmaster® 3555/3575
  • 3575-D with 7" (03821)
  • Riding
  • Kubota® liquid-cooled diesel
  • Liquid Cooled
  • 24.8 hp (18.5 kW) @ 3000 RPM
  • 3-cylinder
  • @ 2200 RPM
  • 68.5 cu.in. (1123 cc)
  • Diesel / Biodiesel
  • Diesel | Traction Drive: 3WD
  • Hydraulic power steering, tilt wheel.
  • Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive provides infinitely variable speed in forward and reverse.
  • Hydrostatic service brake. Hand-operated parking brake.
  • 12V
  • Frequency/Backlapping: 7" reel 1,600 rpm max reel speed, at highest setting. 200 rpm max at low idle and lowest setting for backlapping. | Cutting Unit Lift/Lower: Hydraulic - front and rear cutting unit lift/lower are sequenced for uniform starting and ending points. | System: Heavy-duty 12-volt battery, 570 CCA; 40 amp alternator/regulator. Electronic control unit is microprocessor based, solid state control unit with diagnostic capabilities.
  • 22" x 12" - 12", 4-ply, No Tread
  • 22" x 12" - 12", 4-ply, No Tread
  • Ground Speed - Forward: 0 - 10 mph (0 - 16.1 km/h) | Ground Speed - Reverse: 0 - 3.5 mph (0 - 5.6 km/h) | Mowing Speed: 0 - 7 mph (0 - 11.3 km/h)
  • Formed steel, welded steel and steel tubing.
  • Reel Diameter: 7 in. (17.8cm)
  • 105" (266 cm)
  • 81" (206 cm) | of Cut Range: 0.25" (6.4 mm) - 1.5" (38.1 mm)
  • 112" (274 cm)
  • 100" (254 cm)
  • 7.5 U.S. gal. (28.4 L)
  • 1,755 lbs. (796 kg) with no cutting units. 2,550 lbs. (1,156 kg) with (5) 5" reels, 22" width, 8-blade cutting units.
  • Bedknife: Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to reel adjustment. | Blade Style/Type: Reel | Number of Blades: 11, 8
  • Cutting Unit Type/Configuration: Five hydraulically driven, balanced, DPA cutting Units. Frame precision manufactured, die-cast aluminum for increased strength, simple click adjustment maintenance.
  • Hour meter, fuel gauge, diagnostic lamp, cluster gauge with glow plug and charge indicator lights. Low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off).