2024 Toro Groundsmaster® 4300/4500/4700 Series 4300 7.5ft (2.3m) (30879)

Information

2024 Toro Groundsmaster® 4300/4500/4700 Series 4300 7.5ft (2.3m) (30879)

The Groundsmaster® 4300-D has a lightweight footprint and CrossTrax™ 4-wheel drive for superior hill-climbing. Each of its five Contour™ Plus cutting units closely follows contours for an even cut on undulating terrain.

Features may include:

Easy Service
  • Quick and easy access to all major service areas.
Lighter Weight Design
  • Optimized design and use of lightweight materials means less weight and turf compaction without sacrificing performance and functionality.
Productivity
  • The Groundsmaster® Contour Series mowers provide the productivity you need, no matter the size. Mow up to 10.6 acres (4.3 hectares) per hour to get the job done fast.
Contour® Plus Cutting Decks
  • The Contour™ Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut and a modified rear discharge opening disperses clippings more evenly.
Air-Ride Seat Suspension System
  • Convert the standard seat suspension to air-ride for rough applications to provide more comfortable ride for operators logging long hours in the seat.

Photos

Highlights

  • Dartmouth, Nova Scotia
  • 2024
  • Toro
  • Groundsmaster® 4300/4500/4700 Series 4300 7.5ft (2.3m) (30879)
  • Diesel / Biodiesel
  • Available
  • 86" (215 cm) with 2-post ROPS | of Cut: 0.75” - 4” (1.9 cm - 10.2 cm) in 0.25” (0.6 cm) increments.

Specifications

  • 2024
  • Toro
  • Groundsmaster® 4300/4500/4700 Series
  • 4300 7.5ft (2.3m) (30879)
  • Riding
  • Yanmar®
  • 3-cylinder
  • 43.4 hp (32.4 kW)
  • 88.5 ft.-lbs.
  • 91.4 cu. in. (1.5 liter)
  • EPA Tier IV Final and Stage V compliant.
  • Liquid Cooled
  • Key Start
  • Dry, replaceable primary
  • Hydraulic power steering, tilt wheel
  • 4WD
  • Diesel / Biodiesel
  • 12V
  • 12-volt, 585 CCA battery and 40 amp alternator
  • 26.5" x 14" - 12", 6-ply
  • 20" x 12" - 10", 6-ply
  • Mowing Rate (Productivity): Up to 6.4 acres/hr (2.6 hectacres/hr)
  • Ground Forward / Reverse: 0 - 10 mph (0 - 16.1 km/h) / 0 - 4 mph (0 - 6.4 km/h) | Mowing: 0 - 7 mph (0 - 11.3 km/h)
  • All welded formed-steel frame with integral tie-down anchors.
  • Ground Following: 6" (15.3 cm) anti-scalp cups on each blade
  • 5" (12.7 cm)
  • 86" (215 cm) with 2-post ROPS | of Cut: 0.75” - 4” (1.9 cm - 10.2 cm) in 0.25” (0.6 cm) increments.
  • 126" (320 cm)
  • 96.3" (245 cm) (outside of decks)
  • 88.3" (224 cm) (outside of front tires) | Rear track: 54" (137 cm
  • 60" (152.4 cm)
  • 90” (229 cm)
  • 13.5 U.S. gal. (51.1 L)
  • 14 U.S. gal. (53 L)
  • 5.5 U.S. qt. (5.2 L)
  • raction Unit Weight: 3,205 lbs (1454 kg) - with full fluids and 5 cutting units. Cutting Unit Weight: 140 lbs (64 kg) – single cutting unit assembly only.
  • Blade Style/Type: Rotary | Number of Blades: 5 | Hydraulic Fluid Type: Toro PX™ Extended Life Hydraulic Fluid | Interlocks: Traction pedal, operator presence in seat, PTO engage or disengage, and cutting deck mow or transport safety interlock switches. Parking break set prohibits movement through traction pedal. | Cutting Unit Type/Configuration: Five Contour™ Plus 22” (55.9 cm), rear-discharge rotary cutting units with rear roller on each deck. 90” (229 cm), overlap 5” (12.7 cm), overhang 1” (2.5 cm)
  • Cutting chamber is 10-gauge steel constructed chambers with 12-gauge welded reinforcements. Spindle support is 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels. Cutting unit frame is welded 1.5” (3.8 cm) square x 0.25” (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels.
  • Description: Rear-mount, cross-flow 7-row radiator with 6.3 fins per inch, 5.5 quart (5.2 liter) capacity.
  • Mechanical suspension seat standard with pivoting LH armrest, pivoting RH control arm and retractable seat belt.