2020 Ryan® Lawnaire® V Briggs & Stratton

Information

2020 Ryan® Lawnaire® V Briggs & Stratton

The Lawnaire® V aerator offers the same convenient features and durability as the Lawnaire® IV aerator. But when you need to aerate a larger area faster, there’s no better choice than this coring, drum-type aerator.

With a 26.5-inch swath and quick ground speeds, you can cover up to 40,000 square feet in an hour. Covered lift grips and a front bumper guard make tying down for transportation easy, as well as add protection from damage. Removable rear wheels simplify maneuvering in tight areas and let you pass through gates and down narrow paths with ease. For rental houses that want to offer their customers the foremost lawn equipment, and for lawn care contractors who know that time means money, the Lawnaire® V aerator simply can’t be beat.

Features may include:

  • Standard ¾", hardened alloy steel coring tines keep this durable machine out of the shop and out on the job.
  • A full water drum provides improved traction and increases penetration depth in harder soils.
  • Weights are easily and conveniently removable for easier lifting and quicker, less strenuous transportation.

Photos

Highlights

  • Dartmouth, Nova Scotia
  • 2020
  • Ryan®
  • Lawnaire® V Briggs & Stratton
  • Briggs & Stratton Vanguard
  • Available
  • Aerating: 26.5 in. (673 mm) | 35.5 in. (902 mm)
  • 48.5 in. (1,232 mm)

Specifications

  • 2020
  • Ryan®
  • Lawnaire® V
  • Briggs & Stratton
  • General
  • Briggs & Stratton Vanguard
  • recoil start
  • 4-cycle
  • dual air cleaner; low-tone muffler
  • 12.5 cu. In. (205 cc)
  • Belt tightener
  • (2) 8x2.25 semi-pneumatic w/ball bearings
  • (2) 8x2.25 semi-pneumatic w/ball bearings
  • on/off switch
  • Productivity: Aerates up to 40,000 sq ft/hr (3,716 m2 /hr) at 3.5 mph (4.83 kph)
  • Primary: 4L section V-belt | Tine & Drum: Single #40 nickel-plated chain
  • Core Diameter: 0.75 in. (19 mm) | Aeration Pattern: 3.75 in. x 7 in. (95 mm x 178 mm) | Holes per Sq Ft: Up to 9/ sq ft (.59 / m2 )
  • Tines: 0.75 in. (19 mm) diameter coring type formed from 0.08 in. (2 mm) hollow, hardened alloy steel
  • Aerating: 26.5 in. (673 mm) | 35.5 in. (902 mm)
  • 53.5 in. (1,359 mm)
  • 48.5 in. (1,232 mm)
  • Coring Depth: Up to 2.75 in. (70 mm)
  • 0.84 gal. (3.3 L)
  • 0.63 qt (0.6 L)
  • Wet w/o Weights: 250 lb (113 kg) | Wet w/Weights: 292 lb (132 kg) | Wet w/Weights and Water in Drum: 357 lb (162 kg)
  • Number of Tines: 42 tines per aerator | Lubrication: Grease zerks on the wheels & idler pivot / oil chain